Mountz Inc.
1080 North 11th Street, San Jose, CA 95112 Phone: (408) 292-2214 Fax: (408) 292-2733
www.mountztorque.com
Page 1
5
Trouble Shooting
Problem
Reasons
solution
No power
1. power supply is damaged
2. switch damage
Check for updates
Indicator lit but the
machine does not
work
1. Sensor in wrong location or blocked
2.The power cord outlet is broken
3.Working part of the machine is blocked
1.Check or adjust
2.Re-welding
3.Remove them form the
machine
Screw is stuck in
Screw
Ch
amber
Screw Windows open or
brush position is wrong
Check and adjust
Screw leak out from
the container
Vibration, no stop
1. Feeding delay is too long
2. sensor located in wrong location
3. sensor is not in the right position
Check and adjust
Sensor is not in the right
position
Screw
on rail speed
is too slow
1. Feeding speed is slow and delay
2. Is too short
3. The gap of the rail is not suitable
4. The rail touches the board
5. No gap between rail and front board
6. There are dropped Screws between
vibration motor and bottom board
1.adjust the motor speed
2.Increase the feeding delay
Screw Windows open or
brush position is wrong
Check and adjust
