BF-Series (BF060, BF080 & BF120 models) Operation Instructions
Corporate Headquarters:
1080 North 11th Street, San Jose, CA 95112 Phone: (408) 292-2214 Fax: (408) 292-2733
www.mountztorque.com
Page 12
Features
- Over Heat Protection (OHP) and Over Current Protection (OCP) protect
driver from damage or malfunction.
- Temperature Detection powers down the unit and resets automatically when
unit restores to acceptable levels.
- Switchable 110V & 230V input voltage. Unit will reset itself if motor/current
overload is too high.
- Start & Stop Signal Output (for PLC).
- Screwdriver Lock Signal Input (for PLC).
- Unit can be connected to the Scout (Screw Counter).
Model:
STC40
Item # 145754
Specifications:
Rated Output: 2.6A 105W
Max. Output: 10A
Output VDC: 30/40V
Input VAC: 110/230V
Size inches (W x D x H): 4 3/8” x 7 1/2” x 2 3/8”
Weight: 1.8 lbs.
Operates with: BF-Series and NF-Series
STC40 transformer is power supply designed for operating the BF-Series & NF-
Series brushless electric screwdrivers. Only use this transformer when operating
any BF-Series & NF-Series models.
Power Supply (Transformer)
Program Lock Key
-
Item # 145774
The Program Lock Key protects from incidental or operator tampering of the
programmable settings on the side of select BF-Series models* (V3 models only).
To adjust the settings the Program Lock Key must be is plugged into the STC40 &
FT-30D Mini Transformer.
* Note! The program key is required for the BF-Series Mini models, Standard
Models and Soft Stop Models. RPM & Soft Start Settings cannot be adjusted
without it.
The program Key
cannot
be used with BF-Series Standard Plus Models, Soft Stop Plus Models & Angle & Auto Reverse
Models.
Accessories
Pistol Grip Attachment
The Pistol Grip attachment is an accessory item that converts the BF-Series in-
line electric screwdrivers into pistol grip style tools.
For: BF060, BF080 & BF120 models
Item # 145788
