Mountup MU2001, Instruction Manual, Page: 8 / 12

07
STEP 5: Adjust Tension
Note1:
Be sure to keep the arm in horizontal position during adjustment.
CAUTION
As for how many circles the screw should be turned, the table below is for reference.
Note2:
E
Monitor Weight 1.5kg 3kg 4kg 5kg 6kg 7kg 8kg
Circles
(AT LEAST)
10 8 6 4 3 min 12
Situation 1: Arm falls down
Solution:
Upper Arm with monitor falls down and fails to stay where intended.
Turn the inside screw counterclockwise(“+”direction) to increase gas spring
tension until the arm can stay as intended.
Situation 2: Arm rises up
Solution:
Upper Arm with monitor rises up and fails to stay where intended.
Turn the inside screw clockwise(“-”direction) to decrease gas spring tension
until the arm can stay as intended.
For intended functioning of the mount, you may need to adjust the tension of Upper Arm (A) in accordance
with your monitor weight by 6 mm Allen Key (E).