PDV-6S
Power Supply
Distributor
www.mnmounting.com
[email protected]
2 Merezhna str., Bila Tserkva,
Kyiv region, 09100, Ukraine
EMEA & Asian region:
+32 (0) 472 630212
USA, LATAM, Canada, Australia
& New Zealand region:
+1 (562) 607 7348
Possible Transformation
1. Rotating side mounts.
For ease of installation and best use of the power distributor, you can rotate its side plates 180
degrees. Simply unscrew the four screws, turn the plate and (re)tighten the screws.
2. Transfer of sockets to the front panel.
For the most convenient connection of the devices to the power distributor, install the sockets
on the front panel. To do this, unscrew the screws securing the panel with sockets, unscrew the
blank panel from the front side, transfer the panel with sockets to the front of the power distributor
(without disconnecting the cables from the sockets) and tighten with the screws. Install the blank
panel on the rear of the power distributor the same way.
