Step 4
Insert the Speaker attachment unit (D) into the
Adjusting tube (C) and
fasten it by bolt (H).
Step 5 Attach speaker to assembled stand
Option 1: Speaker installation hole distance is below 300mm/13in from
the bottom
According to your speaker's installation hole, choose bolt L/M,washer(P) and
spacer (Q) ( as Figure 1 and Figure 2 shows) to attach it . Then plug the wires.
D
C
J
H
Wire
For screw hole on flat
panel: Use bolt L/M and
spacer (Q) to attach.
For inset hole: Use
bolt L/M and,washer(P)
and spacer (Q) to attach.
L/M
Q
L
Q
4
Figure 1
Figure 2
P
M
Q
