Installation instruction
：
Step 1
Step 2
Step 3
Take down the Mounting
template, put 4 anchors (I) into
drilled holes, and tap each
anchor flush with the wall by
using a hammer. Then put 4 lag
bolts (H) through the washers (J)
into the anchors, and tighten
each bolt by using a socket
wrench to mount the wall plate
securely.
Use 7/32" diameter drill bit to
drill 4 pilot holes
at marked
positions to a depth of 2.5".
Use 3/8" diameter drill bit to drill 4
holes at marked positions to a
depth of 2.5".
Stick the bubblel level on the
Mounting template (C), put (C)
on your desire position, adjust it
make it level and stick it on the
wall.
Step 1
Step 2
Step 3
Take down the Mounting
template, put 4 lag bolts (H)
through the washers (J) into the
drilled holes, and tighten each
bolt by using a socket wrench to
mount the wall plate securely.
CAUTION
Use a stud finder to make marks at
the edges of two studs, and mark
centerlines of studs. Then place
Mounting template (C) along the
centerlines, level it and stick it.
drywall with
wood stud
Concrete wall
To avoid potential personal injury or property damage:
1. Make sure the
BOLT
HEAD
on the wall plate is upward as the picture shows.
2. Only fits for
solid
concrete wall (thickness more than 100mm/4") and wood stud (thickness more
than 50mm/2"). This product is designed for use in wood stud, solid concrete walls-DO NOT
install drywall alone. The wall must be capable of supporting five times the weight of the TV
plus the mount.
3. All anchors/lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate.
Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
3/8"
7/32"
The wall plate fits for 8”,16” wood stud spacing,please choose corresponding holes in the wall plate
for installation.
3
H
UP
H
UP
I
J
Summary of Contents for MD2731
Page 1: ......