Installation instruction
：
CAUTION
Step 2
Step 2
Step 3
Step 4
3/8"
7/32"
Use wall plate as a template
and pencil to mark 4 hole
locations on your desired
height of the wall.
Use 3/8" diameter drill bit to drill 4
pilot holes at marked positions to a
depth of 2.5".
Take down the Mounting template,
put 4 anchors (I) into drilled holes,
and tap each anchor flush with the
wall by using a hammer. Then put
4 lag bolts (H) through the washers
(J) into the anchors, and tighten
each bolt by using a socket wrench
to mount the wall plate securely.
Use a stud finder to make marks at
the edges of two studs, and mark
centerlines of studs. Then place
wall plate along the centerlines and
use pencil to mark 4 hole locations
on the wall.
Use 7/32" diameter drill bit
to drill 4 pilot holes at
marked positions to a depth
of 2.5".
Take down the Mounting template,
put 4 lag bolts (H) through the
washers (J) into the drilled holes,
and tighten each bolt by using a
socket wrench to mount the wall
plate securely.
Concrete wall
To avoid potential personal injury or property damage:
1. Make sure the
Arrow
on the wall plate is upward as the picture shows.
2. Only fits for
solid
concrete wall (thickness more than 100mm/4") and wood stud (thickness more
than 50mm/2"). This product is designed for use in wood stud, solid concrete walls-DO NOT install
drywall alone. The wall must be capable of supporting five times the weight of the TV plus the mount.
3. All anchors/lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate.
Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
drywall with
wood stud
The wall plate fits for 8”,16” wood stud spacing,please choose corresponding holes in the wall plate
for installation.
16"
UP
H
UP
11
Step 3
Step 4
Part
Ⅱ
fits for TV with MAX 400mmx400mm (16inx16in) VESA
dimension. Take the following steps as reference.
You may need to purchase extra lag bolts and concrete anchors
according to your actual condition.
Summary of Contents for MD2731
Page 1: ......