30
2. Insert the Control Lever and Guard Assy
and make sure the Control Lever End goes
into the slot of Connection Bracket. Fasten
the control Lever and Guard Assy with the
washer, bolt and nut as indicated. Follow the
same steps to install the other Control Lever
and Guard Assy on the other side.
3. Three installation positions available for the
Support Table for different splitting length.
At every installation positions, Lock Down
Hooks (D) are available. Insert the Support
Table in the selected Brackets (E). Turn the
Lock Down Hooks (D) on both side by 90 de-
grees to lock the Support Table down.
4. Familiarize yourself with the controls and
features of this log splitter in the illustrations.
1. Split Wedge
2. Ram Travel Adjusting Rod
3. Transport Handle
4. Ram
5. Control Levers Connection Bracket
6. Transport Handle
7. Plug & switch
8. Motor
9. Base Cover
10. Oil Tank Cover/Air Bleeder
11. Wheels
12. Base
13. Side Bracket for Support Table
14. Table Lock Down Hook
15. Support Table
16. Control Lever Guard
17. Control Lever
18. Adjustable Log Holder