STEP 26: Protect the plans
by laying down clear plastic
wrap over them. Build the
tails over the plans, using
thin CA on all the joints.
STEEL
RULER
STEEL
RULER
SANDING
BLOCK
STEP 27: Lightly sand the
tail parts. You can round the
OUTSIDE edges of the parts
if you'd like, for a nicer
looking finished model.
STEP 28: Sand a bevel in the
elevator and rudder, as
shown. The easiest way to do
this is by placing a metal
straight edge below the part,
and one on top of the part.
That way, you don't end up
with a wavy hinge line.
TOP VIEW OF RUDDER
SIDE VIEW OF ELEVATOR
TOP OF
ELEVATOR