Instructions
WARNING
• Make sure the lap section of the vehicle
belt rests as low as possible over the child's
hips and that the shoulder section of the
vehicle belt is positioned over the centre of
the child's shoulder.
• Verifiy that the vehicle buckle does not
interfere with the armrest or side of the
booster seat. If it does, move the car seat
to another vehicle seating position.
• Do not route the vehicle belt using any
other path when using this car seat. For
assistance contact your retailer or Mountain
Buggy.
• Do not use 2 point vehicle belts to install
this car seat.
• Only install this car seat on forward-facing
vehicle seats.
1. Put the child seat on a forward-facing vehicle seat
(5a).
2. Have the child sit on the booster seat so their back
contacts the backrest from shoulders to bottom. (5c)
3. Adjust the headrest to fit the child. so the vehicle
belt passes over the center of the child’s shoulder.
(5b)
4. Position the vehicle belt over the child. Make sure
the vehicle lap belt passes under both armrests of the
booster seat, and the vehicle shoulder belt passes
under the armrest on the side where the seat belt is
buckled and through the upper belt guide. Check that
the vehicle belt is not twisted and then buckle it. (5c)
Summary of Contents for Haven with safeguard
Page 9: ...9 9 ...