Mountain Buggy Haven with safeguard Instructions Manual Download Page 11 | Manualshive

Page: 11 / 24

Mountain Buggy Haven with safeguard Instructions Manual Download Page 11

11

Safety Warnings

CHECKLIST BEFORE USE

Haven with Safeguard (9–18kg child)

Inspect

• Child restraint free of damage

Verify Child within Size Range

• Weight: between 9kg and 18kg

Install Child Restraint Forward-Facing in Safe
Location in Vehicle

•   Vehicle seats that face front of vehicle only
•   Child facing front of vehicle
•   Compatible vehicle seat belts
•   Belt path followed
•   Tight against vehicle seat

Haven without Safeguard (15–36kg child)

Inspect

• Child restraint free of damage

Verify Child within Size Range

• Weight: between 15kg and 36kg
• Height: eyes below top of backrest

Install Child Restraint Forward-Facing in Safe
Location in Vehicle

•   Vehicle seats that face front of vehicle only
•   Child facing front of vehicle
•   Compatible vehicle seat belts
•   Belt path followed
•   Tight against vehicle seat

Secure Child Properly in Booster

•   Correct vehicle belt fit (across shoulder and lap)
•   Vehicle seat belt not twisted
•   Vehicle lap belt under arm rests
•   Vehicle shoulder belt under arm rest and passes
  through shoulder belt guide

«
...
9
10
11
12
13
...
»

Summary of Contents for Haven with safeguard

























Reviews:

No comments