background image

7

8

To maintain your Buggypod®, please follow the following procedures:

Periodically check the tightness of the mounting boss (g) screws, the mounting bracket (e),
the main hinge (p) screws, and the leg fixing bolts.

Periodically lubricate the main hinges (p) and the safety latch (l). Using a non-silicone lubricant 
will deter the attraction of dirt and grime.

After the Buggypod® has been used in the wet, remove excess water using a cloth.

Light spillages on the textile covers can be removed using a damp cloth.

Use in salty environments may cause rusting or discolouration. After use in these conditions remove 
the textile covers and rinse the Buggypod® in fresh water to remove any salt deposits. Wipe the textile
covers with a damp cloth – do not rinse. Remove the wheel (a) and lubricate the inside, as well as the
primary axle (q) and secondary axle (j). Also lubricate the safety latch (l) and the main hinges (p).

If you suspect your Buggypod® has become damaged, please contact your Revelo retailer.

Your Buggypod® may become unsafe if accessories are used from another supplier,
unless otherwise stated.

Your Buggypod® may become unsafe if replacement parts are used other than those supplied 
or approved by the manufacturer.

Looking after your Buggypod®

Accessories available for your Buggypod

®

Guarantee

Raincover
Sunshade
Comfort Liners in a variety of colours
Extra set of brackets
Visit 

www.buggypod.com

for a list of Buggypod® stockists.

Buggypod® has been carefully designed, manufactured and tested. However, should it prove faulty
within 12 months of purchase under normal use and in compliance
with the user instructions, please return it to the point of purchase and we shall repair it.
If a repair is not possible, we shall replace it. Proof of purchase will be required and we recommend 
that you retain your receipt and attach it to this User Guide.

-

It may be unsafe to use replacement parts other than those supplied or approved by 
the manufacturer.

Accessories that are not approved by the manufacturer shall not be used.

-

Not recommended for a child under 6 months old.

This vehicle must only be used by one child (maximum weight 40lb).

-

A child’s safety is your responsibility. Children should be harnessed in at all times and 
should never be left unattended. The child should be clear of moving parts while making 
adjustments. This vehicle requires regular maintenance by the user. Overloading, incorrect 
folding and the use of non-approved accessories may damage or break this vehicle.
Read the instructions.

-

Each time Buggypod® is folded up against the main buggy the wheel must be clipped 
off and stored on the secondary axle. Please ensure that the axle holding strap is 
placed on the main axle.

-

Constant use may result in excessive wear and tear.

-

The footrest gives your child extra comfort and leg support.
It is not meant as a step for climbing into the Buggypod®.

Take care when using on stairs or escalators.

-

Do not use near an open fire or exposed flame.

-

Please ensure that the brakes of the host pushchair are applied and that the wheels 
of the host pushchair are in a forward-facing locked position before putting your child 
into the Buggypod®.

Warnings

BuggyPodSmorph_May10  5/5/10  20:44  Page 7

Summary of Contents for buggypod Smorph2









Reviews: