![background image](http://html1.mh-extra.com/html/moulinex/ow2208/ow2208_manual_1839855074.webp)
74
PROBLEMS
CAUSES - SOLUTIONS
The kneading paddle is
stuck in the pan.
• Let it soak before removing it.
After pressing on ,
nothing happens.
• EO1 is displayed and flashes on the screen, the appliance
beeps: the appliance is too hot. Wait 1 hour between 2 cycles.
• EOO is displayed and flashes on the screen, the appliance
beeps: the appliance is too cold. Wait for it to reach room
temperature.
• HHH or EEE is displayed and flashes on the screen, the
appliance beeps: malfunction. The machine must be serviced
by authorised personnel.
• A delayed start has been programmed.
After pressing on ,
the motor is on but no
kneading takes place.
• The pan has not been correctly inserted.
• Kneading paddle missing or not installed properly.
In the two cases cited above, stop the appliance manually with
a long press on the button. Start the recipe again from the
beginning.
After a delayed start,
the bread has not risen
enough or nothing
happens.
• You forgot to press on after programming the delayed start
programme.
• The yeast has come into contact with salt and/or water.
• Kneading paddle missing.
Burnt smell.
• Some of the ingredients have fallen outside the pan: unplug
the appliance, let it cool down, then clean the inside with a
damp sponge and without any cleaning product.
• The preparation has overflowed: the quantity of ingredients
used is too great, notably liquid. Follow the proportions given
in the recipe.
TECHNICAL TROUBLESHOOTING GUIDE