10
BEFORE USING FOR THE FIRST TIME
1. R
EMOVE PACKAGING
• Take your appliance out of its packaging. Keep
your warranty card and carefully read the
operating instructions before using your
appliance for the first time.
2. H
INTS AND PRECAUTIONS
• Before each use, the supply cord should be
completely unwound.
• Do not allow it to become trapped or pulled
over sharp edges.
• If you use an electric extension cord, make
sure that it is in perfect condition and
appropriate to the power rating of your
appliance.
• Never unplug the appliance by pulling on the
cord.
• Never operate the vacuum cleaner without
the dust collector and without the filtration
system (cassettes).
• Only use filters by Moulinex.
• Always stop and unplug your appliance before
maintenance or cleaning.
• This appliance is not intended for use by
people (including children) whose physical,
sensory or mental capacities are disabled, or
by people with no experience or familiarity
with such devices, unless they are supervised
by a person who is responsible for their security
or have received instructions as to how to use
the appliance. Children must be supervised to
ensure that they do not play with the
appliance.
USING THE APPLIANCE
1. A
SSEMBLING THE ELEMENTS OF THE APPLIANCE
• Push the flexible hose (18) in the opening (14)
until your hear a clicking sound
- fig. 1
. To
remove it, press the button of the hose
connector and pull
- fig. 2
.
• Assemble the telescopic tube* (19). Adjust it
to the desired length
- fig. 3
.
• Fit the appropriate accessory to the end of
the tube:
- For rugs and wall-to-wall carpeting: use the
head (22) with brushes lifted
- fig. 4
.
- For parquets and smooth flooring: use the
nozzle (22) with the brush extended
- fig. 4
. or
use the parquet nozzle* (21).
- For corners and other areas that are difficult to
reach, use the crevice tool* (24)
- For furniture, use the small brush tool* (27) or
the upholstery tool* (23).
2. P
LUGGING IN THE ELECTRICAL POWER CORD
AND USING THE VACUUM CLEANER
• Completely unwind the power cord, plug in
your vacuum cleaner and push the on/off
pedal (7)
- fig. 5.
• Adjust the suction power on the power nozzle
with the mechanical power control (18).
Open
the
manual
suction
regulator
to
reduce the suction power manually – for
fragile surfaces, for example.
3. S
TORING AND TRANSPORTING THE APPLIANCE
• After use, stop your appliance by pressing on
the
on/off
pedal
(7)
and
unplug
it
- fig. 6
. Replace the cable by pressing the
automatic cable rewind pedal (4)
- fig. 7
.
• In the horizontal position, hook the floor nozzle
(22) onto its storage position at the rear of the
appliance (1a).
• You can transport your vacuum cleaner
easily by means of its fold-down handle (3).
• In an upright position, hook the telescopic
tube* (19) onto its storage position on the
back of the appliance (1b).
CLEANING AND MAINTENANCE
1. E
MPTYING THE DUST COLLECTOR
• Always switch off and unplug your vacuum
cleaner before servicing or cleaning it.
• Empty the dust collector after every use (5).
• Press the dust collector unlock button (8) of your
vacuum cleaner, and lift the
dust collector to remove it from its compartment
(13)
- fig. 8
.
• Over your waste bin, press the push-open button
of the dust collector (12) and empty it
- fig. 9
.
• Remove the separator by turning it clockwise
-
fig. 10
. Remove the dirt from the separator
- fig.
11
and replace it in its casing turning it
anticlockwise
- fig. 12
.
• Clean the rims of the dust collector
- fig. 13
.
• Fit the dust collector back in its compartment
(13) until it engages with a click
- fig. 14
.
• After the cleaning, fig. 15+16, replace the entire
filtering system
fig. 19
.
NoticeKASEO MO 901248C.qxd:901248C 12/01/09 16:28 Page 10