2
SAFETY SYSTEM
USING THE APPLIANCE
BEFORE USE
This appliance is fitted with a safety mecha-
nism. To start the juice machine the cover
(C)
must be properly secured by the safety clamp
(H)
. Opening the safety clamp
(H)
will stop the
juice machine. At the end of a cycle, place the
control switch
(I)
to 0 and wait until the sieve
(D)
stops completely before removing the
cover.
-
We recommend that you wash all the
removable parts
(A, C, D, E, G, L, M, N)
in hot
soapy water (see cleaning §). Rinse and dry
them carefully.
-
Unpack the appliance and then place it on
a solid, stable work surface.
-
Ensure that all packaging has been
removed before starting the appliance.
-
Fit the juice collector
(E)
on the drive shaft
(J)
(see Fig. 1)
-
Place the sieve
(D)
in the juice collector
(E)
.
Ensure that the sieve is correctly clipped
onto the drive shaft
(J)
. You can hear an
audible click (see Fig. 2)
-
Fit the cover
(C)
on the appliance, ejection
spout to the rear (see Fig. 3)
-
Click the safety clamp
(H)
into place over
the cover
(C)
(see Fig. 4)
-
Fit the pulp collector
(G)
on the rear of the
appliance (see Fig. 5).
-
Slide the pusher
(A)
into the feed tube
(B)
,
aligning the groove on the pusher with the
small ridge in the feed tube.
-
If you wish to separate the juice from the
froth, slide the foam separator
(M)
in the
juice jug
(N)
and fit the cover onto the juice
jug (see Fig. 6). The foam separator allows
you to keep the froth into the juice collector
when you pour the juice into a glass.
-
Position the juice jug
(N)
under the pouring
spout in front of the appliance as shown on
Fig. 7
-
Plug in the appliance. You can use the cord
storage
(P)
to adjust the length of the cord
(see Fig. 8)
WHICH SPEED TO USE?
Ingredients
Speed
Approx. weight (in kg)
Quantity of juice
obtained in cl (*)
Apples
2
1
65
Pears
2
1
60
Carrots
2
1
60
Cucumbers
2
1 (about 2 cucumbers)
60
Pineapple
2
1
30
Grapes
1
1
45
Tomatoes
1
1,5
90
Celery
2
1,5
35
Uncorrect choice of speed can induce abnormal vibrations of the appliance
Notice grany:granny 30/11/07 10:28 Page 2
