13
Click the clamp
(J)
into place over the cover
(E).
Position a glass or other receptacle under the pouring spout
(H)
in front of the
appliance.
Plug in the appliance: You can use the cord-tidy
(N)
to adjust the length of the
cord.
Which pusher to use?
Ingredients
Apples
Pears
Carrots
Cucumbers
Pineapple
Grapes
Tomatoes
Celery
Recommended pusher
A
(large pusher)
B
(small pusher)
+ C
(reducer for small pusher)
A
A
B + C
B + C
B + C
B + C
A
B + C
Approx. weight
(in kg)
1
1
1
1 (about 2 cucumbers)
1
1
1.5
1.5
Quantity of juice
obtained in cl (*)
1 glass = 200ml
(approximately)
65
60
60
60
30
45
90
95
(*) The quality and quantity of juice varies greatly according to the date of harvest and the particular variety of
fruit or vegetable. The quantities of juice indicated above are therefore approximate.
- Never use the small pusher
(B)
without its reducer
(C)
.
- Slide the reducer
(C)
into the feed tube
(D),
aligning the groove in the reducer with the small ridge in the
feed tube then lock it in the direction indicated.
- Start the appliance using the switch
(K)
:
- Insert the fruit or vegetables through the feed tube
(D)
.
- The fruit and vegetables must be inserted while the motor is running.
- Do not press too hard on the pusher. Do not use any other utensil.
NEVER
push with the fingers.
- When you have finished, stop the appliance, using the switch
(K)
and
wait for the sieve (F) to
stop completely.
- When the pulp collector
(I)
is full, or the flow of juice slows, empty the collector and clean the sieve
(F)
.
Choosing the wrong pusher may cause the appliance to vibrate abnormally.
AUSTIN n°3 17/08/06 15:11 Page 13
