![MOULDPRO TCU-150 User Manualline Download Page 8](http://html.mh-extra.com/html/mouldpro/tcu-150/tcu-150_user-manualline_1839730008.webp)
[8]
User Guidelines
– TCU-150
12-06-2019
Vers. 003
Before detaching connecting lines in the temperature control circuit and depending on the outlet temperature,
allow the temperature control unit to cool down first and then turn it off. Check that the pump is no longer
running.
WARNING
Important - danger of injury in the event of escaping water or oil!
2.5
Using this Documentation
This documentation contains important information for safe, economical operation and for proper
maintenance of the device.
Compliance with this documentation helps to avoid danger, minimize repair costs and downtime, and
increase the dependability and service life of the unit/system.
NOTE
The operating instructions should be kept near the corresponding unit and
always be accessible to operating and maintenance personnel.
2.5.1 Additional Documentation
The included documentation is completely correct for the basic versions of units. Components that do not
belong to the basic hardware are noted as extra equipment. The corresponding additional documents are
included with special versions of devices. Any additional documents supplement and/or replace the
descriptions contained in this documentation, which are then either invalid or only conditionally valid.
Summary of Contents for TCU-150
