[5]
User Guidelines
– TCU-150
12-06-2019
Vers. 003
2
General Safety Information
2.1
Safety Symbols
DANGER
Denotes imminent danger.
Failure to heed the information can result in death or grave personal injury
(disability)!
WARNING
Denotes a dangerous situation.
Failure to heed the information can result in death or grave personal injury
(disability)!
CAUTION
Denotes a potentially dangerous situation.
Failure to heed the information can result in property damage as well as minor
or moderate personal injury!
NOTE
Denotes general information, useful advice to users and work
recommendations, which, however, do not have any influence on the safety
and health of personnel.
2.2
Range of Application
This general safety information is generally valid for all temperature control units from MOULDPRO.
2.3
Intended Use
The MOULDPRO temperature control unit is build according to the current state of the art and the generally
accepted principles of safety engineering. The temperature control unit is intended solely for the normal use
for heating and/or cooling of injection and die casting moulds, extruders, and mixers in areas in which there is
no risk of explosion.
Summary of Contents for TCU-150
