EN-8
HEART-RATE MONITOR
Session start
1. Enter HRM
mode
2. Start/pause
session
Three flashing lines on the display
indicate that the heart-rate monitor is
waiting to acquire the signal from the
chest belt.
If no no signal is detected, lines remain
fixed.
The default Target Zone is number 1. Before starting the session it is possible to choose a different zone.
- Enter HRM mode and press EL/ADJ button for a few seconds (Adjust Hold)
- Press MODE and reach LEVEL data
- Choose the desired Target Zone with START or SELECT (Level 1-2-3)
- Press EL/ADJ to confirm and return to HRM mode (step 1)
See page 6 to set Target Zones and page 10 for further details.