background image

2

7- 12V

99366GB - XDIGIT-BLE

WARNINGS

TECHNICAL DETAILS BLE UNIT

TENSION

Mains power

7 ÷ 12 V

Battery

3 x AA (1,5 V) Alcaline 

batteries type LR6

MAXIMUM VOLTAGE

80 mA

CABLE (Mains power)

Nominal section of the cables

Min: 0,32 mmq (AWG22)

Max: 2 mmq (AWG14)

According to IEC60332

Length

Recommended < 4 meters

WORKING TEMPERATURE

-10 ÷ +55 °C

MAXIMUM DISTANCE FROM 

DEVICE TO BE CONTROLLED

< 3 meters (in free air)

The device contains a short-range radio frequency transmitter in the range 2400÷2483,5 MHz using Bluetooth Low 

Energy (BLE) technology. The European band is documented in ERC/REC 70-03 as band type b) of the Annex 3: WIDE-

BAND DATA TRANSMISSION SYSTEMS. For this band, no restrictions in the usage are foreseen in EU+EFTA countries.

All BLE units can be used ONLY if associated to XMOTO or to internal unit 99.785 dedicated to XNOVA locks.

-Use only good quality alkaline batteries type AA (LR6) 3 x 1,5V, same brand and production lot, pay atten-
tion to place them with the correct polarity

-Do not use carbon zinc batteries type AA (R6). It is not advisable to use rechargeable batteries due to the 
reduced battery runtime.

-It is recommended to replace ALL the batteries together at least once per year or when the charge status is 
low.

MAINS POWER, connect to Mottura power adapter paying attention to the correct polarity indicated on the 
serigraphy of the board housed on the rear of the unit and the details showed in the following table.

WARNING POWER SUPPLY

Pursuant to article 26 of Italian Legislative Decree no. 49 of 14 March 2014 “Implementation of EU Directive 2012/19 concerning waste 
electrical and electronic equipment (WEEE)” and article 9 of Italian Legislative Decree no. 188 of 20 November 2008 “Implementation 
of EC Directive 2006/66 on batteries and accumulators and waste batteries and accumulators” adequate waste sorting for subsequent 
sending of disposed equipment to recycling, treatment and environmentally compatible disposal contributes to avoiding possible ne-
gative effects on the environment and human health and promotes reuse and/or recycling of the materials composing the equipment.
Unlawful disposal of the product by the user may result in the application of penalties pursuant to current laws and regulations on the 
matter. We remind that batteries and power adapters, if present, must be removed before the device is disposed. Batteries and adapters 
must be collected and separately disposed.

Summary of Contents for XDIGIT 99.779













Reviews: