Thank you for choosing a MOTTURA SERRATURE product. The package contains a new set of
KEYS for the REPLAY/REPLAY MYKEY® RECODEABLE NUCLEUS. If you suspect that your keys
have been stolen, lost, or illegally copied, they can be replaced easily and safely by recoding
the REPLAY NUCLEUS.
For this reason,
we advise you to keep a set of new reserve keys available
, so that you can use
them immediately if necessary, and to keep these instructions handy for future consultation.
The MY KEY® KEYS come with an OWNER’S CARD, to present at authorized MOTTURA CLUBS
when you request duplicates. Your Owner’s Card protects against illegal duplication of keys:
store it carefully.
Without this card it would be impossible to obtain duplicate keys.
INSTRUCTIONS FOR CHANGING CODE
AND FOR FIRST INSERTION OF CODE
IMPORTANT!
• Read these instructions carefully before changing the code.
•
All steps in the procedure must be done with the DOOR OPEN!
• The recoding procedure must be done only with the keys used up to that time (worksite
or master key) and only with original Mottura keys – not with duplicates, which might
damage the nucleus.
• For recoding procedure, use only the
recoding key
(art. 92328, included in the set of spare
keys, fig.2), in order not to damage the nucleus.
• When changing the code, do not force the change pin or the key beyond the stop.
• For MYKEY® versions, store your Owner’s Card carefully so that you may order duplicates
if necessary.
HOW TO CHANGE THE CODE
(WORKING LOCK)
REPLAY NUCLEUS: must already be coded (check the position of the code change pin on the
NUCLEUS – it should be vertical -
CODED
position
fig.1).
1. Check that the NEW key has the same code (C3, C4, etc. for normal versions; T3, T4, etc. for
MYKEY® versions) as the key to be replaced. Keys with different codes do not guarantee the
code change. (fig.2).
2. Remove the internal escutcheon or lift the plug (if present) to access the code change pin.
With the door open
, insert the old coded key (the one to be replaced) from the outside and
turn it in the
opening
direction until it stops or until the deadbolt (if present) retracts com-
pletely. (fig.3).
3. Keeping the key in traction, with the key for recoding (92328),
press and turn
the code
change pin in the closing direction of the lock until it stops (fig.3A). For right hand:
; for
left hand:
(fig.4). Remove the old key.
4. Insert the new coded key and turn it until it stops or until the deadbolt retracts completely.
Press and turn
the code change pin with the key for recoding (fig.5), bringing it to its origi-
nal position
(fig.5A). Turn the key in closing direction to check that the new coded key
opens and closes correctly.
WARNING!
If you release the new key before the code change pin has reached the CODED position
, or if you force the pin into that position, key will not be working. In this case, turn again the
pin in NEUTRAL position (
)
, and repeat procedure Nr. 4.
INSTRUCTIONS FOR INSERTING FIRST CODE
(NON-WORKING LOCK)
The REPLAY NUCLEUS must be in
NEUTRAL
position:
for RIGHT nuclei, position
, for LEFT nuclei, position
(fig.4),
but to let it work, the code change pin must be turned into CODED position
(fig.1).
Procedure is the following :
1.
With the door open
, insert the new coded key and turn it in the opening direction until it
stops or until the deadbolt (if present) retracts completely (fig.6).
2. Keeping the key in traction, with the key for recoding (92328),
press and turn
the code
change pin untill it is vertical (
CODED
position)
(fig.6). Turn the key in closing direction to
check that the new coded key opens and closes correctly.
WARNING!
If you release the new key before the code change pin has reached the CODED position
, or if you force the pin into that position, key will not be working. In this case, turn again the
pin in NEUTRAL position (
)
, and repeat procedure Nr. 1 and 2 .
WARRANTY and MAINTENANCE
This product is guaranteed against malfunction and defects of manufacture under Italian law.
The warranty is valid only upon presentation of the original sales receipt. Malfunctions caused
by incorrect installation or improper use are not covered under warranty. Do not lubricate with
oil: use graphite power only (every 6 months, or when lock is not working smoothly). The non
-observance of the above nullifies the warranty.
Always contact your Mottura dealer if you need to exercise the warranty.
C 3
T 3
LEFT
RIGHT
1
2
3
5
6
7
4
3A
FOR MORTISE LOCKS
If the inner sleeve blocks the insertion or removal of the lock on the door, the sleeve can be
unscrewed. Make sure you do not insert any key into the nucleus until after the sleeve has been
securely screwed back into place (inserting the key when the sleeve is loose could make the
REPLAY nucleus unusable) (fig.7).
5A
92328
MOTTURA SERRATURE DI SICUREZZA S.p.A.
Strada Antica di Francia, 34 - 10157 Sant’Ambrogio (TO)
www.mottura.it - e-mail: [email protected]
99250IGB - 07/08 -
a_006475
SAFEGUARDING YOUR SECURITY
