![background image](http://html1.mh-extra.com/html/motrona/iv-251/iv-251_operating-instructions-manual_1839560003.webp)
IV25101A_e.DOC / Feb-08
Page 3 / 25
Table of Contents
1.
Introduction....................................................................................................4
2.
Terminal Assignments and Connections........................................................5
2.1.
Encoder connections with Master operation ........................................................5
2.2.
Encoder connections with Slave operation...........................................................6
2.3.
Analogue outputs ..................................................................................................6
2.4.
Serial interface......................................................................................................7
3.
DIL switch settings.........................................................................................8
4.
Commissioning...............................................................................................9
4.1.
Self Test: ...............................................................................................................9
4.2.
SSI signal test: ......................................................................................................9
4.3.
Scaling of the analogue output with use of the Teach function:..........................9
4.4.
The Set Input: ......................................................................................................10
5.
Serial Readout of the Actual Encoder Position............................................11
6.
PC setup using the operator software OS32................................................12
7.
Parameter Settings ......................................................................................13
7.1.
Display Settings: .................................................................................................13
7.2.
General Settings:.................................................................................................13
7.3.
SSI Specific Settings:..........................................................................................16
7.4.
SSI Error Settings: ...............................................................................................19
7.5.
Linearisation Settings in %:................................................................................19
7.6.
Set-up Settings:...................................................................................................19
7.7.
RS 232 / RS 485 Settings:...................................................................................19
8.
Free Programmable Linearization.................................................................21
9.
Testing Functions.........................................................................................23
10.
Dimensions and Specifications....................................................................24
11.
Parameter-List..............................................................................................25