(C.) Mount Tire Track
The tire track sits on top of the wheelstop. There are two positions based on your motorcycle’s
length. Align the tire track with desired holes.
Insert the rear tie down arm into the back slot in the MTX platform. Using two medium bolts and two
nuts tighten snugly to minimize rattling - Do not overtighten.
Then put the short bolt with the lockwasher through the tire track and wheelstop into the threaded
hole on the platform tube.
(B.) Mount Wheelstop
Place the front tie down arm in the slot of the platform, making sure the curved section if facing out-
ward. Lay down the the wheelstop onto the platform and align with the holes then insert two bolts to
the desired placement (there are three positions dependant on your motorcycle length). Put on the
nuts and hand tighten only for now (this is to ensure alignment of loading ramp in Step 4).
Sport Components (8/21/21)
7
