MotoSAT Nomad SD2, User Manual

Page: 6 / 23

6
REAR VIEW
The Rear Panel consists of a
MAIN POWER
and
CONTROL CABLE
connector, TO RECEIVER and TO MOUNT F-Connectors.
CONNECTIONS
12 VDC: This connector provides the +/- 12 volt DC input power to
the controller.
Control Cable: This connector sends +/- 12 volt DC power to the
motors and receives positioning information from the dish
To Receiver: This connector is connected to the Satellite Receiver (see
label on the bottom of the Controller.)
To Mount: This connector is connected to the Roof Mount to provide LNB
power (see label of the bottom of the Controller.)
NOTE:
For
DirecTV
5 LNB Slim Line High Definition Receivers
that require a B-Band Converter, install it
between
the controller and
the Mount.
For Dish Network Receivers that use the Separator, install it
between the controller and the receiver.
12 VDC Control Cable To Receiver To Mount