[email protected] www.motorvac.com
Dual Mode Operation
The MotorVac Cool Smoke leak tester utilizes two separate modes for testing:
LEAK TEST MODE:
Allows you to quickly determine if a leak exists without smoke.
SMOKE MODE:
Quickly finds the leak utilizing both visual-vapour (smoke) and UV dye deposits.
The Cool Smoke fluid is a unique solution that allows for highly visible vapour (smoke) to carry UV dye to leak
points. The UV dye will be deposited at small leak locations where the smoke is forced out a leak.
Your MotorVac Cool Smoke automatically sets the critical pressure that must be maintained during EVAP
testing. You don’t need to set flow rates and you don’t need to be concerned with ambient temperatures or
barometric pressures. The MotorVac Cool Smoke is refillable by the end-user when the smoke-producing
solution is depleted. The smoke it produces, as well as the UV dye, is non-toxic and noncorrosive.
The MotorVac Cool Smoke needs no assembly; it is self-calibrating and requires no maintenance.
Height
12.25 in (31 cm)
Current Usage
0.75 A
Width
13.75 in (35 cm)
Inlet pressure required
80-150 psi (5.5-10.3 bar)
Depth
11 in (28 cm)
Output pressure
13 in H20 (0.03 bar)
Weight
15 lbs (6.8 kg)
Output volume
0.14 SCFM (3.9 L/min)
Ship Weight
18.5 lbs (8.4 kg)
Smoke outlet line
10 ft (3 m)
Power Supply
12 VDC
Power Cord
10 ft (3 m)
Technical Specifications
1
