7 Errors
Rev. 09/2020
43
6.
Screw the adapter plate to the stepper motor and place the toothed pulley
on the shaft.
Observe alignment of the adapter plate and the stepper motor
Align the adapter plate as shown in the illustrations.
When aligning the stepper motor, observe the guide nose in the stepper
motor connection plug. Align the stepper motor so that you can connect the
wiring harness optimally to the stepper motor.
7.
Attach the toothed pulley with the washer
and the hexagon socket head cap screw
M4x16
to the shaft of the stepper motor.
Do not tighten the screw
Do not tighten the hexagon socket head cap screw M4x16
. The toothed
pulley must be rotatably mounted on the shaft to allow the fuel ring to be
adjusted.
8.
Insert the O-ring
into the housing of the VariFuel2/2+.
Summary of Contents for VARIFUEL2
