Motortech EasyNOx Operating Manual Download Page 123

Page: 123 / 142

9 Devices

Rev. 06/2021

123

9.2.2.1

Binary Inputs

The

Binary Inputs

button in the

Preferences

view of an added I/O communication module opens

the

Binary Inputs

view.

Note that changes in this view are not saved and applied by the I/O communication module until
you exit the view. Use the drop-down list to link the binary input of the I/O communication mod-
ule displayed in the

Ch.

(Channel) column to the following functions:

–

Not Used

The binary input is not linked to any function.

–

Normal Operation Release for NOx1 / NOx2

A master control can signal to the respective NO

monitor of the EasyNO

ₓ

via a closed binary

input that the conditions for normal operation are met by the engine. In NO

monitoring

mode

Start/Stop via CANopen

, the binary input must be linked to this function.

Summary of Contents for EasyNOx















































































































































Search results

Summary of Contents for EasyNOx

Reviews:

Related manuals for EasyNOx

Brands by name

Popular brands

Motortech EasyNOx, Operating Manual

Search results

Summary of Contents for EasyNOx

Reviews:

Related manuals for EasyNOx

Brands by name

Popular brands