35
Wireless
•
Network SSID
—Enter a unique name for your
hotspot and touch
Next
.
•
Security
—Select the type of security you want:
WEP
,
WPA
, or
WPA2
. Enter a unique password.
Other users can access your Wi-Fi hotspot only if
they enter the correct password.
Note:
Keep it secure. To protect your phone and
hotspot from unauthorized access, it is strongly
recommended that you set up hotspot
Security
(
WPA2
is the most secure), including password.
•
Broadcast Channel
—Select a channel that
minimizes potential interference. You may need
to try different channels after your hotspot is
active for a time.
3
Touch
Save
when the settings are complete.
When your Wi-Fi hotspot is active, other Wi-Fi enabled
devices can connect by entering your hotspot’s
SSID
,
selecting a
Security
type, and entering the correct
Password
.
Bluetooth
TM
handsfree devices
Turn Bluetooth power on or off
Turn on:
Touch Menu
>
System settings
, then drag
the
Bluetooth
power
switch to the right to turn it
on.
OFF
Turn off:
Touch Menu
>
System settings
, then drag
the
Bluetooth
power
switch to the left to turn it
off.
Note:
To extend battery life, turn off Bluetooth power
when not in use.
Connect new Bluetooth devices
Note:
This feature requires an optional accessory.
To connect with a new Bluetooth headset or other
device, you need to pair with it. You only need to do this
once for each device—to connect again, just turn on the
device.
1
Make sure the Bluetooth device you are pairing with
is in discoverable mode.
Note:
Refer to the guide that came with the
Bluetooth device for details.
2
Touch Menu
>
System settings
>
Bluetooth
.
3
Drag the
Bluetooth
power
switch to the right
to turn on and scan. If Bluetooth power is already on,
touch
SEARCH FOR DEVICES
.
4
Touch a device to connect.
5
If necessary, touch
OK
, or enter the device passkey
(like
0000
) to connect to the device. When the device
is connected, the Bluetooth connected indicator
appears in the status bar.
ON
OFF
