
19
X-Pad does not
decode the
SCAN input
The capture frame
does not cover the
entire barcode symbol
Capture again and make sure
that the entire barcode symbol
is covered
The Imager window is
blocked
Clean the window with a lint
free, soft dry cloth.
If the Imager window is badly
scratched, send for service
Make sure that the correct bar-
code symbology is being used
Unreadable barcode
Be sure the barcode symbol is
not covered or damaged
X-Pad does not
respond
Problem in X-Pad
operating system or
communication net-
work
Execute Warm reset by simulta-
neously pressing soft keys
H+CLR+GO for at least one sec-
ond; the X-Pad should function
again
If X-Pad still does not respond,
perform Cold rest (see “Reset-
ting the X-Pad” on page 16). The
operation system will reboot
after about 30 seconds
Table 4: Troubleshooting the X-Pad
Problem
Cause
Solution
Summary of Contents for X-Pad
