CONFIGURATION
SECTION 3
SECTION 3, CONFIGURATION
3-37
Field Description
Firewall
Click to disable the Firewall. The default is
enabled.
Multicast
Pass-through
Click to enable Multicast Pass-through. The
default is disabled.
To add a Packet Filter entry:
1
Packet Filter Name:
Enter a descriptive name.
2
Filter Action:
Select Allow or Deny. Allow: permits data that meets
the criteria selected. Deny: blocks the data that meets the
selected criteria.
3
Packet Direction
: From the drop down box, select either Inbound
or Outbound, based on whether you want to monitor incoming or
outgoing packets.
4
Packet Protocol:
Select the type of protocol to monitor, TCP,
UPD, ICMP, or ALL.
5
Source IP Range
: Enter the IP range.
6
Source Port Begins
and
Ends
: Enter the Port range.
7
Destination IP Range
: Enter the Destination IP range.
8
Destination Port Begins
and
Ends
: Enter the Destination Port
range.
9
Click
Add
to add the entry.
