Motorola VSWR, Service Manual Supplement

Page: 18 / 44

Beryllium health and safety precautions
5th Feb 99
10
Service Manual Supplement: VSWR Monitor for M-Cell 6
68P02900W86-O
Skin contact
Possible irritation and redness at the contact area. Persistent itching and blister
formations can occur which usually resolve on removal from exposure.
First aid
Wash area thoroughly with soap and water. If skin is broken seek immediate medical
assistance.
Eye contact
May cause severe irritation, redness and swelling of eyelid(s) and inflammation of the
mucous membranes of the eyes.
First aid
Flush eyes with running water for at least 15 minutes. Seek medical assistance as soon
as possible.
Handling
procedures
Removal of components from printed circuit boards (PCBs) is to take place only at
Motorola approved repair centres.
The removal station will be equipped with extraction equipment and all other protective
equipment necessary for the safe removal of components containing Beryllium Oxide.
If during removal a component is accidently opened, the Beryllium Oxide dust is to be
wetted into a paste and put into a container with a spatula or similar tool. The spatula/tool
used to collect the paste is also to be placed in the container. The container is then to be
sealed and labelled. A suitable respirator is to be worn at all times during this operation.
Components which are successfully removed are to be placed in a separate bag, sealed
and labelled.
Disposal
methods
Beryllium Oxide or components containing Beryllium Oxide are to be treated as
hazardous waste. All components must be removed where possible from boards and put
into sealed bags labelled Beryllium Oxide components. These bags must be given to the
safety and environmental adviser for disposal.
Under no circumstances are boards or components containing Beryllium Oxide to be put
into the general waste skips or incinerated.
Product life cycle
implications
Motorola GSM and analogue equipment includes components containing Beryllium Oxide
(identified in text as appropriate and indicated by warning labels on the equipment).
These components require specific disposal measures as indicated in the preceding
(Disposal methods) paragraph. Motorola will arrange for the disposal of all such
hazardous waste as part of its Total Customer Satisfaction philosophy and will arrange
for the most environmentally ‘friendly’ disposal available at that time.