Motorola VP22A/IH1, Installation And Use Manual

Page: 18 / 67

1-2 Computer Group Literature Center Web Site
Hardware Preparation and Installation
1
Overview
The following table lists the things you will need to do before you can use
this board and tells where to find the information you need to perform each
step. Be sure to read this entire chapter, including all cautions and
warnings, before you begin.
Unpacking Guidelines
Note If the shipping carton is damaged upon receipt, request that the
carrier’s agent be present during the unpacking and inspection of
the equipment.
Table 1-1. Startup Overview
What you need to do... Refer to...
Unpack the hardware. Unpacking Guidelines on page 1-2
Configure the hardware by setting
jumpers on the motherboard. VP22 Motherboard Preparation on page 1-3
Install the motherboard in the chassis. VP22 Motherboard Installation on page 1-7
Ensure that DIMM memory module(s)
are properly installed on the
motherboard. DIMM Memory Installation on page 1-8
If applicable, install a PCI adapter board
on the motherboard. PCI Adapter Board Installation (Optional)
on page 1-9
Connect other equipment you will be
using. Connection to Peripherals on page 1-11
For more information on optional devices and
equipment, refer to the documentation
provided with the equipment.
Verify the hardware is installed. Completing the Installation on page 1-13
Power up the equipment. Refer to the VP22 microATX Motherboard
BIOS and Programmer’s Reference Guide,
listed in
Appendix C, Related
Documentation .