PCI Adapter Board Installation (Optional)
http://www.motorola.com/computer/literature
1-9
1
!
Warning
Warning
Dangerous voltages, capable of causing death, are present in this
equipment. Use extreme caution when handling, testing, and
adjusting.
!
Caution
Caution
Avoid touching areas of integrated circuitry; static discharge can
damage these circuits.
3. Gently spread the release tabs on each side of the memory socket.
4. Gently press the DIMM into the memory socket until the tabs snap into
place.
5. Repeat this procedure for all other DIMMs you want to install.
PCI Adapter Board Installation (Optional)
PCI adapter boards are installed into PCI 1, PCI 2, PCI 3, and PCI 4 slots
on the VP22 motherboard. To install PCI adapter boards, proceed as
follows:
1. Attach an ESD strap to your wrist. Attach the other end of the ESD
strap to the chassis as a ground (refer to
NOTCH
PIN 1
RELEASE TABS
PIN 72
