Motorola VML750, Installation Manual

Page: 48 / 65

Powering the Modem Up Chapter 2: VML750 Installation
Procedure 2-12 How to Power up the Modem (Continued)
6 After configuring the modem to WiFi Access Point mode, the WiFi LED turns
green. When data is transferred, the WiFi LED blinks green.
Does not apply for B20 LTE only configuration.
7
If your VML750 is equipped to support LTE, you will need to activate
it on the associated LTE network (your own private PS LTE network
or on the public carrier network). To do this, contact the manager of
your network (Motorola, public carrier, or your own internal technical
support) and provide the SIM card identifier number, called the IMSI.
This identifier can be found on the plastic credit card frame for the SIM.
If you are in LTE coverage area, the following sequence will take place, if a SIM
card is inserted and the SIM door is closed:
1. LTE LED blinks orange while the modem searches for the LTE network.
2. LTE LED blinks green while registering to the network.
3. LTE LED is solid green after registration and activation.
The time interval for registering and activating your account may vary
and could typically take up to 2 minutes.
If the SIM door is not closed, the LTE LED rapidly blinks red.
If SIM card is not inserted, the LTE LED blinks red.
2-24
6802988C54-B July 2014