12
VCD9500/VBC9500
Mounting the Vehicle Battery
Charger
1.
Select a mounting location for the charger. It
should be flat, and must provide adequate
support for the charger.
2.
Prepare the mounting surface to accept two M4
screws, using the mounting template below. Drill
two holes with a #8 or 5 mm drill bit.
3.
Position the charger on the mounting surface.
CAUTION
Only mount the Vehicle Battery
Charger in a vertical position with the
release button at the top position. Never
mount the vehicle battery charger on the
side or upside down or on a wall that can
be subject to impact or collision of greater
than 40Gs, in accordance with SAE J1455
Section 4.10.3.5
4.86 mm
(1.912 in.)
