Motorola TIMEPORT 280 Service Manual Download Page 36

Page: 36 / 64

May 14, 2001

6881038B15

Disassembly P280

Removing and Replacing the Infrared Port Lens

Remove the battery cover, battery, antenna, rear escutcheon, rear housing, and
transceiver board as described in the procedures.

Using the flat end of the disassembly tool, gently pry the infrared (IR) port lens
from its cavity in the front housing as shown in Figure 21. The IR port lens
should come away from the housing easily.

To replace, insert the IR port lens into its front housing cavity. Be sure the lens
is properly aligned and fully seated within the front housing.

Replace the transceiver board, rear housing, rear escutcheon, antenna, battery,
and battery cover as described in the procedures.

Removing and Replacing the Speaker

Remove the battery cover, battery, antenna, rear escutcheon, rear housing,
transceiver board, and IR port lens as described in the procedures.

010410o

Figure 21. Removing the infrared port lens

010411o

Figure 22. Removing the speaker

INFRARED

PORT LENS

FRONT HOUSING

DISASSEMBLY TOOL

FRONT HOUSING

SPEAKER

DISASSEMBLY TOOL

Summary of Contents for TIMEPORT 280

































































Search results

Summary of Contents for TIMEPORT 280

Reviews:

Related manuals for TIMEPORT 280

Brands by name

Popular brands

Motorola TIMEPORT 280, Service Manual

Search results

Summary of Contents for TIMEPORT 280

Reviews:

Related manuals for TIMEPORT 280

Brands by name

Popular brands