Motorola Symbol DS6607 Product Reference Manual Download

Page: 338 / 380

Symbol DS6607 Product Reference Guide

B-6

UPC/EAN

Standard packet in full EAN country code format, which is 13 digits for UPC-A, UPC-E, and EAN-13
(not including supplemental data).

Two-digit supplement data only.

Five-digit supplement data only.

Combined data packet comprising 13 digits from a UPC-A, UPC-E, or EAN-13 symbol and 2 or 5 digits
from a supplemental symbol.

EAN-8 data packet.

Example: A UPC-A bar code 012345678905 is transmitted as

]E0

0012345678905

Bookland EAN

No options specified at this time. Always transmit 0.

Example: A Bookland EAN bar code 123456789X is transmitted as

]X0

123456789X

Code 11

Single check digit

Two check digits

Check characters validated but not transmitted.

GS1 DataBar Family

No option specified at this time. Always transmit 0. GS1 DataBar-14 and GS1 DataBar Limited transmit
with an Application Identifier “01”.

Note: In UCC/EAN-128 emulation mode, GS1 DataBar is transmitted using Code 128 rules (i.e., ]C1).

Example: A GS1 DataBar-14 bar code 100123456788902 is transmitted as

001100123456788902.

EAN.UCC Composites
(GS1 DataBar,
UCC/EAN-128,
2D portion of UPC
composite)

Native mode transmission.

Note: UPC portion of composite is transmitted using UPC rules.

Standard data packet.

Data packet containing the data following an encoded symbol separator character.

Data packet containing the data following an escape mechanism character. The data packet does not
support the ECI protocol.

Data packet containing the data following an escape mechanism character. The data packet supports
the ECI protocol.

UCC/EAN-128 emulation

Note: UPC portion of composite is transmitted using UPC rules.

Data packet is a UCC/EAN-128 symbol (i.e., data is preceded with ]JC1).

PDF417, Micro PDF417

Reader set to conform to protocol defined in 1994 PDF417 symbology specifications.

Note:

When this

option is transmitted, the receiver cannot reliably determine whether ECIs have been invoked or
whether data byte 92

DEC

has been doubled in transmission.

Reader set to follow the ECI protocol (Extended Channel Interpretation). All data characters 92

DEC

are

doubled.

Reader set for Basic Channel operation (no escape character transmission protocol). Data characters
92

DEC

are not doubled.

Note:

When decoders are set to this mode, unbuffered Macro symbols and

symbols requiring the decoder to convey ECI escape sequences cannot be transmitted.

The bar code contains a UCC/EAN-128 symbol, and the first codeword is 903-907, 912, 914, 915.

The bar code contains a UCC/EAN-128 symbol, and the first codeword is in the range 908-909.

The bar code contains a UCC/EAN-128 symbol, and the first codeword is in the range 910-911.

Example: A PDF417 bar code ABCD, with no transmission protocol enabled, is transmitted as ]L2ABCD.

Table B-3. Modifier Characters (Continued)

Code Type

Option Value

Option

Summary of Contents for Symbol DS6607





























































































































































































































































































































































































Search results

Summary of Contents for Symbol DS6607

Reviews:

Related manuals for Symbol DS6607

Brands by name

Popular brands

Motorola Symbol DS6607, Product Reference Manual

Search results

Summary of Contents for Symbol DS6607

Reviews:

Related manuals for Symbol DS6607

Brands by name

Popular brands