1 5
BASIC CONFIGURATION
The SB3500 contains all necessary software. You don’t need to configure the
SB3500, but you must configure your computer for TCP/IP and check for an
IP address. Your service provider may provide additional instructions for
setting up your computer. The following basic instructions are for
Windows™ 95 or Windows 98. If you are using a different operating system,
refer to that user guide.
Configuring for TCP/IP
1
On the Windows Desktop, click Start.
2
Select Settings and then Control Panel from the pop-up menus.
3
Double-click the Network icon on the Control Panel window.
4
Select the Configuration tab on the Network window.
5
Check to see if TCP/IP has been installed for the Ethernet card. If
TCP/IP appears in the list of network components, it is installed and
you can proceed to step 10. If it doesn’t appear on the list, continue
with step 6.
Summary of Contents for SURFboard SB3500
Page 5: ......
Page 28: ...M o t o ro l a I n c 4 7 7 9 1 2 0 0 1 9 9 9 0 0 ...
