Motorola Sonic Maxx 810, Quick Start Manual

Page: 4 / 52

5. Bluetooth Connection
You can use your Speaker “Sonic Maxx 810” as an external speaker for your Bluetooth enabled smartphone or
tablet.
1. Press Mode button to set Bluetooth mode (you can Press and hold the Play/Pause button to erase the
previous connectings).
2. Choose “Sonic Maxx 810” on your mobile device to connect.
3. Once successfully connected, audio will stream from your Bluetooth device to this speaker.
-1). Press and hold the TWS button of either speaker for 3 seconds, then release, TWS connection will be
made with the master speaker. By default, the speaker which connected to your smartphone is the master
speaker (R channel), the other one is the slave speaker (L channel).
-2). In TWS mode, press and hold the TWS button for 3 seconds on either speaker or power off the speaker
to exit the TWS mode.
Notes:
–– This speaker can memorize a maximum of 8 paired devices. The ninth paired device will replace the first
one.
–– The operational range between this speaker and a Bluetooth device is approximately 10 meters (30 feet).
–– If a PIN code is requested while connecting a Bluetooth device, enter “0000”.
–– Bluetooth performance can be affected by the distance between this product and your Bluetooth device
and the environment of operation.
To terminate the Bluetooth-enabled device:
• Turn off this speaker;
• Disable Bluetooth on your device;
• Move this speaker beyond the Bluetooth operational range.
To reconnect the Bluetooth-enabled device:
• When you turn on this speaker next time, it will reconnect to the last connected device automatically;
• If not, manually select “Sonic Maxx 810” on your Bluetooth device to start a connection.
TWS Mode
Use two “Sonic Maxx 810” speakers can connect to each other in TWS mode.
10m (30”)
10m (30”)
Bluetooth
DEVICES
ON
Bluetooth
Sonic Maxx 810
Sonic Maxx 820
2