Motorola SELECT 2000, Manual

Page: 45 / 78

Using the Options Menu
43
Outgoing Messages
This option is used to view and manage your Outgoing Messages.
These messages will be stored on your SIM card. When you select
this option, the total number of messages will be displayed,
followed by the first message in the list.
A
You cannot send an outgoing message until the Message
Service Center number has been set. See ‘Message Settings.’
Press
O
when viewing any message to enter the sub-menu for
Send Message
,
Edit Message
,
Delete Message
, and
Go to
Next Message
. See ‘How to Read SMS Messages’ for more
information on navigating through the messages.
Go to Next Message
This option will display the next outgoing message.
Send Message
If you select this option, you will be prompted for a phone number.
Enter the number and then press
O
to send the message.
Edit Message
This option allows you to use the Message Editor to edit the
selected message and then to either send the modified message
or store it in your Outgoing Messages list. See ‘How to Create
and Edit SMS Messages’ for more information on using the
Message Editor.
Delete Message
This option will delete the currently viewed message.
A
Keep regularly used short messages handy by storing them in
your Outgoing Message list. Simply recall a stored message and
modify if necessary, then send it to keep people up to date.
Message Editor
The Message Editor is used to create a new message or edit the
currently selected message. Once selected, choose to either
Send
Message
or
Store Message
in your Outgoing Messages list.
See ‘How to Create and Edit SMS Messages’ for more
information on using the Message Editor.
Cell Broadcast
This option is used to set the Cell Broadcast settings.
The option has two settings,
On
or
Off
.
If you change the setting to On , you will be asked to choose a
channel.
Please contact your Service Provider for a list and description of
available channels.
While a broadcast message is scrolling across the display, you can
stop and start it by pressing
<
. Press
>
to restart the
message from the beginning. If you want to remove the message
from the display, press
C
followed by
O
.
A
If you need to use the
<
and
>
keys for their normal
functions while you are receiving a Cell Broadcast message,
you must first remove the message.
i E7
to access Message Editor.