Motorola SE4710, Integration Manual

Page: 43 / 82

CHAPTER 4 ELECTRICAL INTERFACE
Introduction
Table 4-1 lists the pins and signals of the pin connector on the SE4710. See Figure 2-4 on page 2-6 for the pin 1
location on the rear of the engine, on the side opposite the aiming/illumination system.
Table 4-1
SE4710 Host Interface Signal Information
Pin Number Signal Name I/O Description
1 GND - Ground Reference
2 PCLK Out Sensor Pixel Clock
3 GND - Ground Reference
4 HSYNC Out Horizontal Sync
5 VCC_ILLUM In Illumination Power
6 VCC_ILLUM In Illumination Power
7 VDD_IO_HOST In Digital I/O Reference Voltage and Power
8 VCC In Aim, Logic and Sensor Power
9 EXT_ILLUM_EN Out External Illumination Trigger
10 HOST_D0 Out Sensor Pixel Data - LSB
11 HOST_D1 Out Sensor Pixel Data
12 HOST_D2 Out Sensor Pixel Data
13 HOST_D3 Out Sensor Pixel Data
14 HOST_D4 Out Sensor Pixel Data
15 HOST_D5 Out Sensor Pixel Data
16 HOST_D6 Out Sensor Pixel Data
17 HOST_D7 Out Sensor Pixel Data - MSB