10
Getting Started
4.
If there is no connection or you are out of range, the video display will go
off and the symbol
will flash on the LCD display, and the unit will beep
every 9 seconds. (If the unit is on scan
the
1 ?
symbol displays.)
Move the owner unit closer to the pet until the link is re-established.
5.
Press and hold the
P
POWER ON/OFF button, until the progress bar
scrolls fully across, to turn OFF the owner unit.
NOTE
The battery icon
turns RED and flashes to indicate that the battery is low,
and it gives a beep every 16 seconds. The battery needs to be recharged.
Battery pack takes about 16 hours to charge fully.
When charging
1.
If the owner unit is turned OFF, when the adapter is plugged in, it displays a
"power plug" icon briefly, then a large battery icon with internal segments
cycling for 60 seconds, before the display goes blank, but the unit
continues to charged. The Blue LED at top left corner lights up to indicate
the adapter is plugged in.
2.
If the owner unit is turned ON, when the adapter is plugged in, the battery
icon in the screen’s top right corner will show that the battery is charging
by cycling the internal segments. The segments stop cycling when the
battery is fully charged. The Blue LED at top left corner lights up to indicate
the adapter is plugged in.
0
Summary of Contents for SCOUT600
Page 26: ......
