SB5101 Cable Modem Overview
MOTOROLA BCS
CONFIDENTIAL
Page 31 of 34
10.1.1 Connecting to the Cable Modem via Diagnostic Console Cable:
The CLI can be accessed via the Diagnostic Console Cable and the DIAG port on the back of the
modem. This is typically done via “Windows HyperTerminal” with the following settings:
•
Bits per second:
38400
•
Data bits:
8
•
Parity:
None
•
Stop bits:
1
•
Flow Control:
None
Diagnostic cables are supplied with the modems.
10.1.2 Connecting to the Cable Modem via Ethernet and an “rlogin” based Telnet Client:
Modem Ethernet IP address:
192.168.100.1
To access CLI from HFC side:
rlogin <
modem IP address from DHCP
>
To access CLI from client CPE:
rlogin 192.168.100.1
10.1.3 Logging Into the Cable Modem:
Login name: target
Password:
first 15 digits of the unit serial number (
It is best to copy these into a Notepad
Window first, then copy/paste to the Terminal Window you are using for access.
)
10.1.4 Key Commands:
Addressing
Displays modem addressing information (
Ethernet MAC and IP
)
arpstorm
Displays ARP Storm filter statistics
blpinfo
Displays Baseline Privacy Key Management information
bootChange
Changes modem boot parameters
bridge
Displays state of bridge forwarding layer and statistics
clrcpemac
<xx-xx-xx-xx-xx>
Clear one static CPE MAC address from Table of known CPE’s.
Number of CPE’s (Controlled by TFTP TLV Value
MaxCPE)
config
Use to set modem configuration settings, such as starting frequency ranges,
known frequency and other registration/scanning parameters
cpemac
Lists MAC addresses known by the modem including those provisioned and
learned.
defaultcfg
Sets the modem back to factory defaults
dhcpc
Displays modem DHCP configuration information received from server
dlfile
Downloads new software image from a specified server through TFTP
dsdiag
Displays downstream diagnostic information, (frequency, SNR, FEC lock
status)
eventlog
Displays event logs up to 173 entries, with wraparound buffer
exit | quit
Exit the login session
factSetCliOff
Turns off CLI after next reboot
help | ?
Lists available CLI commands
haltreset
Cancels reset action request
