6
SAC2000-4000CR Four Slot Spare Battery Charger
Inserting Batteries
To insert batteries in the cradle, align the connectors on the bottom of the battery
with the battery charging connectors in the cradle. Push down on the top of the
battery until it clicks into place, engaging the contacts in the cradle.
Charging Batteries
The battery begins charging when the green LED indicator flashes. A complete
charge of a fully discharged battery can take up to four hours using external
power.
LED Indicators
Removing Batteries
To remove batteries from the cradle, pull the battery out of the battery well from
the top of the battery.
Troubleshooting
If the cradle does not work after following the previous procedures:
•
Check the system power.
•
Check for loose cable connections.
•
Check that batteries are inserted properly in the cradle.
Power/Charging LED Sequences
Flashing Green Battery LED
Flashes when battery charges.
Solid Green Battery LED
Battery is fully charged.
Solid Blue Cradle LED
Lights when power is applied; off when there is no power
applied.
Fast Flashing Green Battery LED
Error condition; check with system administrator.
CAUTION
Do not pour, spray, or spill any liquid on the cradle.
