33
Advanced settings
8. Advanced settings
8.1 Recall
time
This setting is useful to access certain network and PABX/switchboard
services.
The default S3000 recall time is suitable for your country and network
operator. It is unlikely that you should need to change this setting unless
advised to do so.
1. Press
, scroll to
ADVANCED SET
and press
.
2.
RECALL TIME
is displayed. Press
.
3. Press or to select the setting you want:
SHORT
,
MEDIUM
,
LONG
.
4. Press
to confirm.
5. Press
to return to standby.
NOTE
The use of your S3000 cannot be guaranteed on all PABX.
8.2 Dial
mode
The default S3000 dialling mode is suitable for your country and network
operator. It is unlikely that you should need to change this setting unless
advised to do so.
1. Press
, scroll to
ADVANCED SET
and press
.
2. Scroll to
DIAL MODE
. Press
.
3. Press or to select
TONE
or
PULSE
.
4. Press
to confirm.
5. Press
to return to standby.
8.2.1 Temporarily switch from Pulse to Tone dialling
1. In talk mode press and hold
for 2 seconds.
The dial mode will change from Pulse to Tone for the duration of the call.
8.3 Call
barring
Prevent certain numbers from being dialled from your S3000. Store up to
four specific numbers, each up to 4 digits – for example, international or
local prefixes.
Bypass Call barring by switching the setting to
OFF
.
NOTE
If you switch Call barring on,
BARR MODE ON
will be displayed on your screen in
standby mode.
