17
Using the phone
2. Press
to answer the call via hands-free.
3. To switch between hands-free and the earpiece press
.
IMPORTANT
When the phone is ringing, avoid holding the earpiece too close to your ear
as it may damage your hearing.
NOTE
If you have subscribed to your Network’s Caller ID service and assigned a
VIP Group to the caller’s number, the caller’s details are displayed before the
phone starts ringing (see “Store an entry” on page 20 and “Group melody”
on page 29). You can set your phone to give the default melody as soon as
the call is received then once the caller’s identity is displayed, the assigned
melody will start. See “First ring” on page 30.
If Auto Pick up mode (see page 30) is on, simply lift up the handset from its
base to answer the call. The default setting is ON. See all “Default settings”
on page 37.
An incoming call has priority over other events. Whenever there is an
incoming call, other operations in progress such as phone settings, menu
navigation, etc. will be ended.
3.7 Adjust volume
1. During a call, press or to adjust the earpiece or hands-free volume.
The level is shown in the handset display.
3.8 Mute
Mute the microphone so that you can talk to someone else in the room
without your caller hearing you.
1. During a call, press
. The microphone is muted.
2. Press
again to turn the microphone back on.
3.9 End a call
1. Press
.
After you hang up, the duration the phone is off-hook is displayed for 5
seconds.
NOTE
If auto hang-up is on (see page 31) simply replace the handset on the base to
end the call. The default setting is
ON
.
3.10 Switch handset on/off
1. Press and hold
to switch the handset on or off.
