PROGRAMMING THE
REPEATER
41
User Guide
How to Read and Modify Your
Repeater’s Features
1.
Ensure you have installed the latest CPS in
your computer.
2.
Turn the repeater OFF.
3.
Plug the CPS Programming Cable P/N
RKN4155 into the Repeater’s programming
connector. “Figure 19. Programming the
Repeater Using the CPS” on page 40.
4.
Connect the other end of the CPS cable into
your computer ‘s USB port.
5.
Open your CPS software and turn your
repeater ON.
6.
Click “read” icon in the upper bar menu.
Note:
The “read” icon is grayed-out until the
computer detects the CPS Programming
Cable.
7.
When the CPS reads the repeater
successfully, you can see a window pop up
showing a bar progress icon indicating the
repeater’s profile is being read.
Note:
You can now read and modify all your
repeater features with the options available
in the left side menu in your profile window.
For more details on how to read, write or
modify radio features, please refer to the
CPS Help Menu –> Content and Index.
Detailed information about how to clone the
repeater’s profile is also available in the
CPS Help Menu –> Content and Index –>
Cloning Repeaters.
2000018_B_PORS_en.book Page 41 Thursday, January 14, 2010 2:10 PM
