Motorola RFS7000 Series, Reference Manual

Page: 565 / 588

20-61
qos
[classification |
mcast-with-dot11i|
mcast1 | mcast2 |
prioritize-voice | svp |
weight|wmm]
Quality of Service commands.
• classification [background|best-effort|video|voice|wmm] – Select how
traffic on this WLAN is classified (relative prioritization on the access
port).
• background – Traffic on this WLAN is treated as background traffic.
• best-effort – Traffic on this WLAN is treated as best-effort.
• video – Traffic on this WLAN is treated as video.
• voice – Traffic on this WLAN is treated as voice.
• wmm – Use WMM based classification (using DSCP or 802.1p tags)
to classify traffic into different queues.
• mcast-with-dot11i (enable)– Enables muticast mask with dot11i.
• mcast1|mcast2 (AA-BB-CC-DD-EE-FF) – The Egress prioritization multicast
mask.
• AA-BB-CC-DD-EE-FF – MAC address in AA-BB-CC-DD-EE-FF format.
• prioritize-voice – Prioritizes voice frames over general data frames (applies
non-WMM mobile unit).
• svp (enable) – Enables Spectralink Voice Prioritization support on this
WLAN.
• weight <1-10> – Sets the egress weight (relative priority to other WLANs)
of this WLAN.
• wmm (8021p|background| best-effort| dscp|video|voice) (aifsn|cw|txop-
limit|acm) – 802.11e / Wireless MultiMedia (WMM) parameters
(supported only on AP300).
• 8021p – Uses 802.1p frame priority (field in the VLAN tag) to
determine packet priority.
• background – Background category traffic.
• best-effort – Best effort category traffic.
• dscp – Uses DSCP (Differentiated Services Code Point) bits in the IP
header to determine packet priority.
• video – Video traffic category traffic.
• voice – Voice traffic category traffic.