Motorola RFS7000 Series, Reference Manual

Page: 28 / 588

Overview 1-8
1.5.4 Re-displaying the Current Command Line
It is easy to recall the current command line entry if the system suddenly displays a message when entering a
command. To redisplay the current command line (refresh the screen), use the following keystroke:
1.5.5 Command Output pagination
When working with the CLI, output often extends beyond the visible screen length. In such a case,
Press Any
Key to Continue (Q to Quit)
displays at the bottom of the screen. To resume, press the Return key to
scroll down one line, or press the Spacebar to display the next full screen of output.
1.5.6 Transposing Mistyped Characters
If you have mistyped a command, it is possible to transpose the mistyped characters. To transpose characters,
use the following keystroke:
Ctrl-D Deletes the character at the cursor.
Ctrl-K Deletes all characters from the cursor to the end of the command line.
Ctrl-W Deletes the word up to the cursor.
Esc, D Deletes from the cursor to the end of the word.
Keystrokes Purpose
Ctrl-L Redisplays the current command line.
Keystrokes Purpose
Ctrl-T Transposes the character to the left of the cursor with the character located at the
cursor.
Keystrokes Purpose