Motorola RDX SERIES, User Manual

Page: 47 / 180

English
44
PROGRAM
M
ING FEA
T
URES
Solutions point of purchase for more
information.
Time-Out Timer
This timer sets the amount of time that the radio can
continuously transmit before the transmission is
automatically terminated. The default setting is 60
seconds and can be changed using the CPS.
Power Select
Power Select allows you to select between high and
low transmission power per frequency in each
channel. The power levels for RDX High Power are 2/
4W for UHF and 2/5W for VHF.
Call Tones
Call Tones feature allows you to transmit an audible
tone to other radios on the same channel to alert them
that you are about to talk or to alert them without
speaking.
To use this feature, the Call Tones must be
programmed to either SB1 or SB2 and 1 of the 3 pre-
recorded tones is selected.
Scramble
The Scramble feature makes transmissions sound
garbled to anyone listening without the same code.
Scramble default value is OFF. To change the
scramble code during radio’s normal operation, the
Scramble feature must be programmed to either SB1
or SB2.
Reverse Burst
Reverse Burst eliminates unwanted noise (squelch
tail) during loss of carrier detection. You can select
values of either 180 or 240 to be compatible with other
radios. The default value is 180.
Notes:
• The features described in previous pages are just
some of the features CPS has. CPS offers more
capabilities. For more information refer to the
HELP file in the CPS.
• Some of the features available with the CPS
software may vary depending on the radio model.
TEXT-TO-SPEECH (CHANGING PRE-
DEFINED VOICE ALIASES)
Enable User Pre-Defined Voice Prompt (VP)
Checkbox
Check the box to enable user-defined voice on the
selected channel. The user is given the option to
MN002895A01_final.book Page 44 Thursday, January 5, 2017 10:51 AM